The Toyota Landcruiser Owners Club

[karl2000]

Just found this procedure; if it doesn't work let me know.  I think I've got a paper copy I scribbled over to clarify a few things.  Here's what I've got anyway:

-----

Remote part programming

STEP1.       Open Driver side door

STEP 2.       Put the Original key in and out of ignition for 2 times

STEP 3.       Close and open driver door for 2 times

STEP 4.       Original Key in and out for once

STEP 5.       Shut and open door for twice

STEP 6.       Close door

STEP 7.       Put Original Key in the ignition and Turn ignition on

STEP 8.       Turn ignition off and remove key

STEP 9.       Door locks will cycle

STEP 10.   Do the following for all remotes:

Press lock and unlock together for 1s, then press the lock button

STEP 11.   Locks will cycle put key in ignition turn to on then off

STEP 12.   Remove key from ignition, close door and test remote

To Delete All Remotes from the Vehicle

At Step 7, turn the key on and off for 5 times then remove key, door locks will cycle for 5 times. Turn the key on then off. Open shut door. All remotes that were coded into the car, have now been removed.

2 Key part transponder chip programming manual (immobiliser)

STEP 1.       Put Original master key in and out of ignition for 5 times. Finish with key in ignition (in, out, in, out, in, out, in, out, in)

STEP 2.       Open and shut door for 6 times

STEP 3.       Remove original key and insert the new key (Do not turn the key, just insert it into the ignition

STEP 4.       Leave for 60s (or til light goes out)

STEP 5.       After 60s security light stops flashing then you can start car.

STEP 6.       Take key out

STEP 7.       Open and shut door

[Google]

[karl2000]

I wonder if the techstream version makes any difference?  When I coded a key with it, I was using version 12.20, but I see you're on a much newer version.

My LC is also 2006, and I use the -0608 model when connecting

[Tractionman]

Thanks Karl, that's what I was talking about. 👍

You didn't say anything about annoying the neighbours, opening and shutting doors 🤣

[karl2000]

Now I've programmed the keys I annoy them by dragging axle stands!

[Tractionman]

👍🤣 I find once the BFH comes out and the swearing starts, it all goes quiet. 😠

[el3388]

[Tractionman]

HOORAY !

[karl2000]

Brilliant well done!

Try an older version of techstream, maybe they removed some functionality for the ancient vehicles out of the newer versions!