View previous topic :: View next topic |
Author |
Message |
mick the digger! **
Joined: 11 Oct 2009 Posts: 63 Location: Co Wicklow Ireland
|
Posted: Mon Nov 16, 2009 0:34 Post subject: waste engine oil? |
|
|
As it says anyone ever run on a waste engine oil diesel mix??
done a bit of research on this and old merc diesels will run fine on it....will a 100?
have nearly 800 litres of the stuff.... |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Google Sponsor
![](images/google_avatar.png)
|
Posted: Mon Nov 16, 2009 0:34 Post subject: Google Ads keep this community free to join! |
|
|
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
davey b Lifetime member
![Lifetime member Lifetime member](./images/stars/sgold.gif)
Joined: 02 Nov 2007 Posts: 141 Location: Kent or Gloucs
|
Posted: Mon Nov 16, 2009 19:18 Post subject: |
|
|
Now this would be interesting......
May have to be careful about all the H&S, tax, emissions, carcinogenic implications ![Rolling Eyes](images/smiles/icon_rolleyes.gif) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
mick the digger! **
Joined: 11 Oct 2009 Posts: 63 Location: Co Wicklow Ireland
|
Posted: Mon Nov 16, 2009 19:35 Post subject: |
|
|
davey b wrote: |
Now this would be interesting......
May have to be careful about all the H&S, tax, emissions, carcinogenic implications |
do a google search on running a diesel on waste engine oil, people have been doing it for years!
you can buy heaters that run on waste engine oil, they are epa certifed and they run at much lower temprtures than diesel engines
also you can produce 2500 liters a year of bio-diesel from waste cooking oil without any tax impications....how could waste engine oil differ?
ran one of my G wagens today for about 50 miles on 50/50 diesel waste oil mix...no noticeable smoke.
its was doe tested 2weeks ago on pure diesel and ive have the emmission readings for it, in the next few days im going to get them to test the emmissions on the waste oil diesel mix and compare the readings.
still not sure about the 100?? how much electrics are in them? and would it confuse them
think Ill just give it a go! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
davey b Lifetime member
![Lifetime member Lifetime member](./images/stars/sgold.gif)
Joined: 02 Nov 2007 Posts: 141 Location: Kent or Gloucs
|
Posted: Mon Nov 16, 2009 22:08 Post subject: |
|
|
I wasn't trying to stop you, oil is oil in a compression ignition engine!
There might be a need for some extra filtration prior to putting it in the injection pump and injectors. The other bits are just considerations
I run an 80 so I don't have any electronics to worry about. I didn't think that common rail injection came in until the 120 series or D4-D. Those pumps run very high pressures so may have issues, but I think the 100 should be ok.
I tend to mix all oils in the waste oil tin - EP, ATF, Motorcycle - and probably the bad bit - brake fluid, so I may take better care in future.
Keep up the info I may follow you into the breach |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
mick the digger! **
Joined: 11 Oct 2009 Posts: 63 Location: Co Wicklow Ireland
|
Posted: Mon Nov 16, 2009 23:13 Post subject: |
|
|
the first batch I done just used some cheese cloth to filter it, as its been sitting in 200ltr barrels for years so any water debris etc will be in the bottom, so didnt pump it out right from the bottom.
have ordered some 75 mircron sock type filters that hold 20ltrs so hang them up over a clean bucket and let it drain over night.
btw would worry about atf, alot of guys in the US seem to run used atf mixed with diesel!
personally I think it would need to be ran through a 1 micron filter (hydraulic oil filter )to get rid of any alluminumum particals that would be in used atf! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
uk_vette Lifetime member
![Lifetime member Lifetime member](./images/stars/sgold.gif)
Joined: 29 Oct 2007 Posts: 1422 Location: Warrington, Cheshire
|
Posted: Mon Nov 16, 2009 23:38 Post subject: |
|
|
Hello Mick,
You might want to consider a much finer filter than that.
I used to use 5 micron, or 10 micron,
I used to use the 0inch 'big blue' filters into which I could put different grade filters.
I had it on a 're-circ' system in my garage, it would pull out of the bottom of a 200 liter blue plastic drum, through a 'T' peice with 2 valves, and then through 2 of the 24 inch 'big blue' filters, the first filter was, I think, 25 micron, then right behind that was a 5 or 10 micron,
http://www.filtersfast.com/Pentek-150233-HD-Filter-Housing.asp
This would happily be pumped in a closed loop, back into the drum.
When I wanted to 'fill the tank, it was a matter of turning the 2 valves so the re-circ stopped, and the flow, went through a liter counting meter, and finally through a 1 micron hydraulic oil filter, disposable canister, which never got blocked incidently.
I had a 1 inch hose connecting this lot all together,i could simply, 'zero' th liters meter, and just pump in what i wanted, normally about 70 liters.
I will snap a few images.
'vette |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
mick the digger! **
Joined: 11 Oct 2009 Posts: 63 Location: Co Wicklow Ireland
|
Posted: Tue Nov 17, 2009 14:35 Post subject: |
|
|
thanks for the pointers vette!!
just want to make sure it will work first before setting it up with barrels and filters etc (money lol)
look forward to your pictures!
as for diesel/waste oil mixture ratio, some say 50/50 others say just in very cold times this amount and all other times between 70/30 and 80/20, is there any way of measuring viscosity?? |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
uk_vette Lifetime member
![Lifetime member Lifetime member](./images/stars/sgold.gif)
Joined: 29 Oct 2007 Posts: 1422 Location: Warrington, Cheshire
|
Posted: Tue Nov 17, 2009 15:29 Post subject: |
|
|
mick the digger! wrote: |
thanks for the pointers vette!!
just want to make sure it will work first before setting it up with barrels and filters etc (money lol)
look forward to your pictures!
as for diesel/waste oil mixture ratio, some say 50/50 others say just in very cold times this amount and all other times between 70/30 and 80/20, is there any way of measuring viscosity?? |
.
.
I only went to 25% with my 120 LC.
And that was using new oil.
I must say, there was no difference in power, but the engine did run much smoother
.
.
.
Because i am using new oil, I dont need the twin filter set up, so thats why it is not hooked up just now.
My son has a Surf, and he uses all sorts of oil, so we use the twin filters housings, and a 75 micron, then a 5 micron, then finally the hydraulic oill canister.
Never any dirt or problems
'vette |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
lucky Lifetime member
![Lifetime member Lifetime member](./images/stars/sgold.gif)
![](images/avatars/17959468494b4f305b67bd2.gif)
Joined: 21 Jan 2005 Posts: 1229 Location: Cheltenham, Glos
|
Posted: Tue Nov 17, 2009 16:49 Post subject: |
|
|
Sounds like a good way of getting rid of the waste engine oil after changing it rather than having to run it down the dump and risking it getting all over the carpet. _________________ 1999 Land Cruiser Amazon VX Active 4.2TD Auto
Gloucestershire 4x4 Response
Landcruiser-rocks |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
mick the digger! **
Joined: 11 Oct 2009 Posts: 63 Location: Co Wicklow Ireland
|
Posted: Sat Dec 05, 2009 18:04 Post subject: |
|
|
just an up date, ive been running the 100 on 50/50 mix of waste engine oil diesel for the last couple of weeks! done about 1500kms runs fine, a little bit smokey from cold!
Im building a filter rig next week using an old copper cylinder will throw up a few pictures when its done.
will i be looking for a new injection pump in a few weeks..... ![Very Happy](images/smiles/icon_biggrin.gif) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
rockall *
Joined: 30 Dec 2008 Posts: 21 Location: Ireland
|
Posted: Sun Dec 13, 2009 19:52 Post subject: Waste Engine Oil |
|
|
Mick
1997 Colorado
Mick - Great idea - interested to see and hear how your 'poitin stil' works out. (For those who havent heard of Poitin - Google!!)
Actually thinking about the whole concept - is this not the ultimate form of recycling - no extra transport, factory or labour costs to clean and recycle the waste oil. In addition as you will already have paid Income Tax (approx 50%) on the money used to purchase the oil and VAT (21% here) on the oil itself surely the tax situation is quite clear cut !!
Agree that adequate filtration is necessary. Many years ago I converted some cars to diesel - 2.1 Renault turbo diesel engine and manual gearbox into the luxury V6 Automatic Renault 25. These were not cheap conversions and my clients were quite particular so as an extra I used to fit an auxillary remote bypass micronic filter for the engine oil. I used a semi synthetic oil at the time and had acess to getting the oil professionally analysed - the results proved the filter product without any shadow of doubt. The kit was manufactured or sold by Kleenoil, I used to purchase my kits and spare filters from a distributor in Northern Ireland. I will look them up during the week to see if their system is still around. My thoughts are that this concept - using waste engine- has been looking at a lot of us in the face - like Mick I have a regular supply of waste oil - less now with the recession!! I am thinking of a small pump and filter and then pumping the clean finished product directly into the diesel storage tank. where it can mix. Obviously keen to hear what the recommended dosage percentage rate is if anybody has the technical background.
I have got older and lazyier !! - Now I just run a full synthetic engine oil (Millers) and change between 12 and 15,000 miles - no problems to date and passed the 363,000 mile mark last week. Ultimately when this lady retires, at approx 500,000 miles, I hope to treat myself to am Amazon which will probably see me out and as I still have a Keenoil system here I will stick it on.
Incidentally does anybody know of, or can recommend, a suitable long range tank conversion available to suit a 97 Colorado - new or secondhand - I want it as a plumbed in unit - no seperate filler.
Regards
Bill |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
gordini911 **
Joined: 17 Jan 2008 Posts: 76 Location: North Yorkshire
|
Posted: Mon Dec 14, 2009 21:59 Post subject: Waste Oil |
|
|
This sounds interesting.I can get free waste oil and a 50/50 mix =50mpg in a landcruiser.Their must be down sides. Do we have any experts on the site that can tell us about the long term effects on the engine.If it is this good why is it not taken up commercially.
Regards Keith. _________________ 1997 4.2 TD. GX Manual. voelcker tune. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
vxtd *
Joined: 16 Aug 2009 Posts: 45 Location: Aberdeen
|
Posted: Thu Dec 17, 2009 12:11 Post subject: |
|
|
yes waste oil does work on an older indirect injected engine, dont expect the extra carbon to do much for your injector nozzles, valves etc. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
vxtd *
Joined: 16 Aug 2009 Posts: 45 Location: Aberdeen
|
Posted: Thu Dec 17, 2009 12:12 Post subject: |
|
|
also waste oil is very very acidic, long term issues with injector pumps i can imagine not so bad on a 205 diesel sh*tter! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Boff *
Joined: 17 May 2009 Posts: 27 Location: Wrexham
|
Posted: Thu Jan 14, 2010 19:45 Post subject: Re: Yellow stone diesel parts plant is one of the leading ma |
|
|
yellowstonepart wrote: |
Yellow stone diesel parts plant is one of the leading manufacturers
of engine parts, in particular diesel fuel injection system
accessories for replacement, such as Fuel injection Nozzle, Plunger and
Delivery valve, ETC In south of china .
for more detail please visit our website : yellowstonediesel
dieselinjection
Yellow stone diesel parts plant was founded in 1997.Over the years,
Yellow stone has grown and gained a reputation for producing
high quality products and delivering them on time. |
I wonder if anyone has got experience of running their vehicle on waste Spam ![Question](images/smiles/icon_question.gif) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|