View previous topic :: View next topic |
Author |
Message |
Royston *
Joined: 30 Jul 2010 Posts: 15 Location: Surrey
|
Posted: Tue Mar 22, 2011 18:19 Post subject: Double din radio removal - 97' Prado? |
|
|
Hi Chaps,
Tried unsuccessfully to locate some info so was hoping someone might point me in the right direction. I have obtained a UK version sonty double din radio but have no idea of how to remove the factory fitted one ....any help appreciated
thanks
Roy |
|
Back to top |
|
|
Google Sponsor
|
Posted: Tue Mar 22, 2011 18:19 Post subject: Google Ads keep this community free to join! |
|
|
|
|
Back to top |
|
|
andy Moderator
Joined: 16 Dec 2003 Posts: 2260 Location: Polegate, Sussex, England.
|
Posted: Tue Mar 22, 2011 18:35 Post subject: |
|
|
http://www.tlocuk.co.uk/forums/viewtopic.php?t=10378 _________________ It's Not a Bl**dy Jeep it's a Landcruiser
150 series Invincible X
100 Series VX Limited
Mercedes Sprinter 311 Luton
1993 VX80 4.2td SOLD
1996 Hilux Surf SSR-G Intercooler Sold
1994 Hilux Surf SSR-V Sold |
|
Back to top |
|
|
Royston *
Joined: 30 Jul 2010 Posts: 15 Location: Surrey
|
Posted: Tue Mar 22, 2011 21:00 Post subject: |
|
|
andy wrote: |
http://www.tlocuk.co.uk/forums/viewtopic.php?t=10378 |
Thanks..will give it a try at the weekend. Do you have any idea of the lugs that hold the panel in place nearer the top eg; might these be pop on/off or a hook type??, Dont want to give it a tug and find it snaps in half |
|
Back to top |
|
|
andy Moderator
Joined: 16 Dec 2003 Posts: 2260 Location: Polegate, Sussex, England.
|
Posted: Tue Mar 22, 2011 21:13 Post subject: |
|
|
Sorry dont have a 90, but most that I have seen are push in lugs with spring clips, work from the bottom and it should all become clear. _________________ It's Not a Bl**dy Jeep it's a Landcruiser
150 series Invincible X
100 Series VX Limited
Mercedes Sprinter 311 Luton
1993 VX80 4.2td SOLD
1996 Hilux Surf SSR-G Intercooler Sold
1994 Hilux Surf SSR-V Sold |
|
Back to top |
|
|
Royston *
Joined: 30 Jul 2010 Posts: 15 Location: Surrey
|
Posted: Tue Mar 22, 2011 21:47 Post subject: |
|
|
andy wrote: |
Sorry dont have a 90, but most that I have seen are push in lugs with spring clips, work from the bottom and it should all become clear. |
Big Thanks. |
|
Back to top |
|
|
EvilEd *
Joined: 12 Jan 2011 Posts: 28 Location: Kent
|
Posted: Wed Mar 23, 2011 8:40 Post subject: |
|
|
Pull the bottom out, the top two on mine are tight but if you look either side of the vents, there is a gap in the moulding that you can see as you pull it out slightly, Big screwdriver with some tape on, one side at a time, poke it in there and give it a twist. Mine always pops the vents off the panel slightly as I pull it off too, just re-seat before you re-assemble. _________________ '98 colorado VX LWB 3.4 Petrol (VZJ95 ?) |
|
Back to top |
|
|
|